A ratchet strap is an efficient method to secure your cargo, but as your strap probably came without instructions, here’s a simple and fast instruction guide. These instructions should work with ratchet tie down. Regardless of the dimensions of your strap (they generally come in 1″, 2″, 3″, or 4″ widths), all of them work much the same way.
A ratchet strap usually is available in two pieces, so step one is always to attach the sections. To achieve that, just feed the strap throughout the slot from the attached handle and ratchet (move the handle up and down) until the slot is pointing straight up. That will enable you to feed the strap through easily.
Next, pull the strap tight and hook it up to whatever you’re loading. Make sure you keep your strap straight as you’re working with it. When it gets twisted, it could bind up.
Hook it up on both sides, making sure you don’t leave too much slack. It is a common mistake. If there’s excess slack, the strapping material will get bound up in the handle when you start ratcheting, making it tough to release. If the binding is severe enough, you can even end up needing to cut the strap.
As soon as you get two points connected, all you need to do is pull the strap tight. Line it, again ensuring you keep everything in line. Once you’ve done that, grab the handle, pull dexypky18 release, and heavy duty ratchet straps it until it’s tight. Make sure to move the handle down again to the closed position when you’re done ratcheting.
Your cargo should be safely attached and able to go.
When you’re ready to release the strap, yet again be sure everything’s in line in order to avoid binding issues. Then grab the discharge with your thumb or fingers, pulling it and open entirely.