High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging problem for owners. From the desired temperature to their favorite light level, guests are more likely to return for an additional stay when they can customize their room to suit their preferences. However, providing these characteristics using old technology wastes plenty of energy. For example, there are plenty of difficulties with the old card key switches. Guests can put any card within the old switches, or they may ask for more than one card. Even if hotel desk refuses to provide more than one card to a guest, she/he might claim to have lost the card.
The conventional old technology of hotel card switch. Additionally there is a great deal of over usage of lights and AC energy because of things running even when guests aren’t in their rooms, and also this could cause a monetary loss for the owner. Obviously, no hotel owner wants to prohibit guests from having a comfortable stay, nor do owners expect guests to get into a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the legal right to fulfill their interests.
Some hotel owners think if they separate the AC from your main network, less energy will be consumed, while others think that motion sensors are definitely the solution. However, these approaches forget to resolve the situation. The AC is the most energy-consuming device of all the, and motion sensors could be nightmares given that they only function based on movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company supplies the best answer for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its capability to detect human presence in a room. This ceiling-mounted sensor has many options, such as a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new means for hotel energy saving technology. By installing this door sensor on the entrance to your room, connecting it to the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is entirely resolved.
The following logics can be defined with this sensor to manage room energy without any discomfort for guests:
Logic 1: If you have any movement inside the room, the occupancy mode will be on.
Logic 2: When the main door is opened and closed, a flag will turn on for starters minute to see if there exists movement in room. If no movement is detected after one minute, the program will activate energy-saving mode. This is valuable in situations whenever a guest enters the room briefly. In energy-saving mode all lighting is off with the exception of a nightlight, which stays on for 3 hours just in case there exists another guest having a nap. Also, the AC will not be turned off, however its temperature will be decreased by 2 degrees. This can help save energy as time passes.
Logic 3: When the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC is going to be switched off automatically. It is additionally easy to define lower temperature levels for the AC. In addition, the vitality Servant can make the AC on/off if this recognizes that a balcony window/door is open. All this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off if there is enough sun light.
Another practical and beneficial capability of this sensor is its built-in thermostat, which will help keep up with the right temperature constantly. This is important to keep furniture fresh and intact. Also, in hot spots and even if the room is empty for some time, humidity and bad smells will not turn into a problem within the room. This sensor could be designed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This can happen repeatedly throughout the day if necessary. A comparable performance may be programmed in cold spots to stop mold.
Another choice of the smart system is TV control. In the event the hotel provides the guest having a room tablet, she/he will be able to control the room’s TV by using it. This sensor was placed in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and several satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the chance to meet both hotel owners and guests interests and requires with just a couple items and in the most power efficient possible way. To learn more or to schedule a consultation, contact us at www.tiscontrol.com