Understand the air duct cleaning process to ensure that you have cleaned the duct well enough, and surely breathe unpolluted air. Be familiar with the air duct cleaning process to be assured of the quality of air that gets into your lungs. For instance, a sealant for moldy growth is not only a poor solution, but also may aggravate the issue.
Inspect Prior to Cleaning
A routine system check on the air inflow system gives background information in the ductwork and ventilation involved; it may also help to identify problems, if any, inside the air flow system. Your air duct cleaning santa rosa may suggest sealing duct air leaks; this truly saves energy and helps cut down your power bills. A clogged filter may be identified and replaced; high-efficiency pleated filter or even an electrostatic filter may replace a fiberglass one. An inspection can lead to the detection of the mold problem that should be sorted out before you begin the air duct cleaning processes. Should your ductwork is made of sturdy sheet metal ducts, a biocide might be requested sanitation; realize that you can’t utilize a biocide over a fiberglass ductwork or over a metal duct with fiberglass lining.
Create Negative Pressure
Vacuum cleaning, that can cause negative pressure, uses compressed air to remove any dirt and debris from the system. It is always safe to exhaust the dust articles to the outdoor air; any indoor exhaust must utilize a HEPA-filtered vacuum. Sometimes, the entire system is susceptible to negative pressure to dislodge the dirt and debris, before any mechanical cleaning.
Clean the conduits that run through the entire system. Cleaning involves using specialized tools, like nylon brushes or cable driven brushes, in conjunction with a high-powered vacuum on the supply and return area of the system. For fiberglass lined ducts or fiberboard ducts, use soft-bristled brushes. An insulated air duct must not get wet; when it gets wet or moldy, tend not to attempt cleaning because replacing is the best solution. Return registers usually pull in polluted air and gets dusty; these could be removed and cleaned, or just vacuumed. Sealants can be used to repair damaged fiberglass insulation or to make a duct air tight; apply sealants only after completing the air duct cleaning process.
Clean Other Components
Ask your qualified service provider to wash all elements of your cooling and heating system-the temperature exchanger surface, sides of the cooling coil, coil fins, coil drain pan, plenum, cabinet interior, combustion chamber, humidifier and blower blades. Dryer vent cleaning also prevents possible fire hazard. Be aware that any asbestos containing equipment has to be handled by specially trained and equipped staff. An EPA approved sanitizer are often used to clean the interiors of the ducts as well as the ventilation system; please learn concerning the safety and health issues concerning the aspects of the registered antimicrobial products.
That can be done a random visual check for the actual existence of dirt on any your supply and return ducts, and ensure that the air duct cleaning process has been a thorough one. Be sure that all the air vents–the registers, grilles and diffusers look clean, and possess been reattached in position. Also check the system operation post-cleaning, in both the heating and cooling modes. Know your air duct cleaning process, and ensure that the indoor air which you inhale is definitely of great quality.
One other reason to consider having your ducts cleaned is if you feel water has got in your air ducts, through either a leak or through condensation. This may cause mould to cultivate inside the ducts, which can be harmful. You will have to fix the leak or condensation problem and after that have your ducts thoroughly disinfected — or perhaps replaced depending on how qcejsr your mould problem is becoming.
New homeowners or individuals who have recently undergone renovations may should also get their ducts cleaned when they suspect the contractors who worked on their house might not have done a good job for cleaning up. Sometimes construction crews allow small particles of firbreglass, drywall and sawdust to accumulate in the air ducts.
You need to consider owning your ducts cleaned if you feel there is a blockage which is affecting airflow for your furnace. Before you decide to spending a lot of money to change your furnace, first have your ducts inspected and cleaned along with your furnace and air conditioner.
You can do some duct-cleaning yourself, specially the return duct, which is pretty large and often accumulates more dust that your particular supply ducts. To clean up your return duct, first take away the grill on the away from the duct then use a vacuum to eliminate any debris.
However, if you think that dirt inside your ducts is affecting your quality of air, causing mould to develop or blocking the flow of air for your furnace, you ought to call a reputable duct-cleaning service. Make sure to find out if the services are a member of any trade organizations or connected to a reputable HVAC (heating, ventilation and air-conditioning) company before you decide to hire them.